Kit de conversión de tapones de aceite Dry-Save Wunderlich - plata

Kit de conversión de tapones de aceite Dry-Save Wunderlich - plata

N°de referencia. 27450-001
Precio: € 69,90
Incl. 19% IVA, Excl. gastos de envío
Disponible

El objeto de compra no puede incluir todas la piezas y accesorios que se muestran en la imagen.

El modelo especial del primer casquete de válvula de 4 válvulas requiere una construcción especial, que reúna hermeticidad absoluta y protección contra robo. Para ello, fue posible utilizar nuestros tapones de aceite de seguridad de última generación. El modelo robusto y el atractivo diseño distinguen a estos tapones de aceite de fácil manipulación.

Características:
  • ¡Reequipamiento de las construcciones de plástico herméticas de fácil sabotaje (asiento de los tapones en el casquete de válvula y del tapón) con nuestros nuevos tapones para bóxer!
  • Asiento de los tapones de aluminio con un tapón de llenado atornillable, hermético y antirrobo.
  • Los tapones sólo de deben abrirse con una llave especial.
  • Construcción del tapón en una pieza, irrompible.
  • Amplia apertura para un llenado seguro.
  • La unidad completa no se puede extraer o rotar simultáneamente ya que en el original, el asiento del tapón se sostiene únicamente a través de un ajuste ligero (fácilmente desmontable con la fuerza de la mano) en la tapa. En la mayoría de los casos el tapón no es hermético, sino muestra este evidente escurrimiento en detalle. Además, una pequeña saliente sirve en el asiento como protección antitorsión. A menudo no funciona: si el casquete se retuerce inadvertidamente, esta protección puede dañarse y el asiento también podría torcerse en el futuro.
  • 5 años de garantía.
  • Hecho en Alemania.
Filename Filesize
10343-3517 2.97 MB Download

Opiniones del cliente

Easy fix Review by David Pope
Valoración
Well well made, had to crank case cover off wasn't hard. Nice look! (Realizado el 08/04/13)
No more leaks anymore! Review by Endre Laszlo Bulbuk
Valoración
Takes around 20 minutes to install,the hardest part is to push the top part in place,after that goes like "oiled"I did not opened it sice install,but will write more feedback after the first use(opening-closing the cap)very satisfied at this point! (Realizado el 17/03/13)
Dry Safe Oil Filler Plug review (1 year) Review by Bruce Marcus
Valoración
After installing this item 13 months ago it failed with oil leaking all over the valve cover. Attempted reinstallation failed as well with the plug and locking ring refusing to seat securely in the valve cover oil filler orifice. Replaced OEM part. Not impressed at all with this item although it appears beautifully made. (Realizado el 03/02/13)
no leaks but not perfect. Review by Shin
Valoración
after installed there is no leak anymore.but it wasn't easy installing it, putting the adapter into place and fitting the small locating pin was not easy, I had to use a plastic hammer to push it into place. then the helper screws together with a screwdriver is not the best way to tighten it up. the small screw in the inside was almost impossible to handle.buy two the opening tool. the one I had was just tight to my keychain and the pin in it just disappeared and I couldn't use it and had to use a screwdriver to open the cap, had to order a new tool from wunderlich. I bought two this time, but now because I used a screwdriver the tool doesn't fit well anymore.I wanted to have a spare cap, only the upper cap, but wunderlich do not sell them separately. what do you do if you loose it?? you have to buy the whole kit again just to have a spare. and again, when installed its a very good solution to this leaking problem. (Realizado el 28/12/12)
No more leaks Review by P.M.Brppks
Valoración
No more leaks. Just remember to bring the key with you. Getting my old factory seal out was a bear, but after that it was easy. (Realizado el 06/05/12)
Permanent OIL LEAK FIX! Review by David Collins
Valoración
I have had two R1150R's and both have had issues with the filler plug leaking. I ordered what BMW calls their solution to the problem. I sent it back dissatisfied. The Solution from Wunderlich is the only real solution. Truly leak proof, truly tamper proof and easy to install. Thank you Wunderlich! (Realizado el 22/04/12)
dry safe oil filler plug Review by macadamia
Valoración
I was using another locking oil filler plug that was leaking. This plug has not leaked since its install. Very nicely made; good install instructions... (Realizado el 13/03/12)
nice item Review by SLS
Valoración
works great, easy install, no more leaks! BTW, the rocker cover gaskets can be reused. Of course they are "recommended' to be replaced. I've done like 6 valve adjustments without replacing these gaskets and never had a single leak. Just rotate the inner round doughnut rubber sparkplug hole gasket 90 degree when its reinstalled to ensure a fresh sealing surface. (Realizado el 30/12/11)
careful adjustment of the adjusting nut Review by Julian Ruiz
Valoración
after adjustment cap, should be done to force the nut to grip the screw cap and max can be given 2 laps which are sufficient for a snug fit. (Realizado el 18/10/11)
Please Note! Review by Joe F.
Valoración
Looking to get this and upon reading the instructions, noticed 2 things:1. Since the valve cover is being removed, its recommended to replace the gaskets, so you'll need to pick those up.2. Because Loctite is being applied to the set screws, its recommended to let it dry for 24 hours, so don't plan on riding for that time.HTH. (Realizado el 26/05/11)

Escriba su propia opinión

¿Cómo califica a este producto? *

  5 Estrellas 4 Estrellas 3 Estrellas 2 Estrellas 1 Estrella
Valoración