Wunderlich Kit de modification du bouchon d’huile de sécurité «Dry-Sav - argent

Wunderlich Kit de modification du bouchon d’huile de sécurité «Dry-Sav - argent

Numéro d´article 27450-001
Prix : 69,90 €
TVA 19% incluse, (frais d´envoi exclus)
Soon available again

L´objet de l´achat peut ne pas inclure les accessoires éventuellement photographiés.

Wunderlich Kit de modification du bouchon d’huile de sécurité «Dry-Save»

La conception spéciale du premier chapeau de soupape à 4 soupapes a nécessité une conception particulière, garantissant à la fois la protection contre le vol et une étanchéité absolue.

Ceci a permis à nos retenues d’huile de dernière génération d’entrer en action. Leur construction robuste et leur design étaient tout simplement parfaitement indiqués.

Caractéristiques :

  • nouvelle gestion des fuites, construction en plastique antisabotage pour nos nouvelles retenues d’huile pour Boxers !
  • système de retenue en aluminium boulonné avec retenues vissées étanches et antivol. (Nécessaire pour les modèles R 850/1100/1150er),
  • les bouchons ne peuvent être ouvertes qu’à l’aide de clés spéciales,
  • conception de la retenue d’huile en une pièce et indestructible,
  • ouverture d’alimentation plus grande pour un remplissage plus sûr,
  • l’ensemble ne peut plus être arraché ni emporté*,
  • garantie 5 ans,
  • Made in Germany. R 850/1100/1150 GS + Adventure. Gris-argent anodisé.
    • * Sur le modèle d’origine, la retenue d’huile n’est maintenue au couvercle que par un léger ajustement (facilement démontable à la main). La plupart du temps la retenue n’est pas étanche, et constitue une solution imparfaite. En outre un petit culot sur la retenue est censé servir de protection contre la tension. Souvent ceci ne fonctionne pas : lorsque le couvercle est accidentellement tiré, cette protection peut être endommagée et la retenue finit par se détacher.

Filename Filesize
10343-3517 2.97 MB Download

Commentaires des clients

Easy fix Review by David Pope
Évaluation
Well well made, had to crank case cover off wasn't hard. Nice look! (Posté le 08/04/13)
No more leaks anymore! Review by Endre Laszlo Bulbuk
Évaluation
Takes around 20 minutes to install,the hardest part is to push the top part in place,after that goes like "oiled"I did not opened it sice install,but will write more feedback after the first use(opening-closing the cap)very satisfied at this point! (Posté le 17/03/13)
Dry Safe Oil Filler Plug review (1 year) Review by Bruce Marcus
Évaluation
After installing this item 13 months ago it failed with oil leaking all over the valve cover. Attempted reinstallation failed as well with the plug and locking ring refusing to seat securely in the valve cover oil filler orifice. Replaced OEM part. Not impressed at all with this item although it appears beautifully made. (Posté le 03/02/13)
no leaks but not perfect. Review by Shin
Évaluation
after installed there is no leak anymore.but it wasn't easy installing it, putting the adapter into place and fitting the small locating pin was not easy, I had to use a plastic hammer to push it into place. then the helper screws together with a screwdriver is not the best way to tighten it up. the small screw in the inside was almost impossible to handle.buy two the opening tool. the one I had was just tight to my keychain and the pin in it just disappeared and I couldn't use it and had to use a screwdriver to open the cap, had to order a new tool from wunderlich. I bought two this time, but now because I used a screwdriver the tool doesn't fit well anymore.I wanted to have a spare cap, only the upper cap, but wunderlich do not sell them separately. what do you do if you loose it?? you have to buy the whole kit again just to have a spare. and again, when installed its a very good solution to this leaking problem. (Posté le 28/12/12)
No more leaks Review by P.M.Brppks
Évaluation
No more leaks. Just remember to bring the key with you. Getting my old factory seal out was a bear, but after that it was easy. (Posté le 06/05/12)
Permanent OIL LEAK FIX! Review by David Collins
Évaluation
I have had two R1150R's and both have had issues with the filler plug leaking. I ordered what BMW calls their solution to the problem. I sent it back dissatisfied. The Solution from Wunderlich is the only real solution. Truly leak proof, truly tamper proof and easy to install. Thank you Wunderlich! (Posté le 22/04/12)
dry safe oil filler plug Review by macadamia
Évaluation
I was using another locking oil filler plug that was leaking. This plug has not leaked since its install. Very nicely made; good install instructions... (Posté le 13/03/12)
nice item Review by SLS
Évaluation
works great, easy install, no more leaks! BTW, the rocker cover gaskets can be reused. Of course they are "recommended' to be replaced. I've done like 6 valve adjustments without replacing these gaskets and never had a single leak. Just rotate the inner round doughnut rubber sparkplug hole gasket 90 degree when its reinstalled to ensure a fresh sealing surface. (Posté le 30/12/11)
careful adjustment of the adjusting nut Review by Julian Ruiz
Évaluation
after adjustment cap, should be done to force the nut to grip the screw cap and max can be given 2 laps which are sufficient for a snug fit. (Posté le 18/10/11)
Please Note! Review by Joe F.
Évaluation
Looking to get this and upon reading the instructions, noticed 2 things:1. Since the valve cover is being removed, its recommended to replace the gaskets, so you'll need to pick those up.2. Because Loctite is being applied to the set screws, its recommended to let it dry for 24 hours, so don't plan on riding for that time.HTH. (Posté le 26/05/11)

Rédigez votre propre commentaire

Quelle note donneriez-vous à ce produit ? *

  5 étoiles 4 étoiles 3 étoiles 2 étoiles 1 étoile
Évaluation