The SP Connect WIRELESS CHARGING MODULE can be mounted on any SP Connect mount. Just as it did without, your SP Connect Phone Case attaches in seconds with a 90 ° turn. Now all you have to do is attach this module for wireless charging to a power source (USB socket, battery, power bank, ...) and you can charge your smartphone* on the go. Now, if you have planned longer trips, you do not have to worry about your smartphone battery losing power.
- Multiple applications (motorcycle, bicycle, car, ...)
- Compatible with all SP Connect MicroRail mounts and adapters
- Power: up to 7.5W
- Dimensions: 95mm x 55mm x 12mm
- 1 USB-C / USB cable (50cm)
For direct connection to a battery, the following power cable is required: 45150-211 or 45150-214 with QC 3.0 standard
Please note: Only works with the SP Connect™ Phone Case. Functionality is not guaranteed with the SP Connect™ Universal Interface.
Keyless ignition systems can be affected due to overlapping frequency channels. If ignition is not possible, remove the phone or press the standby button to stop the charging process. To avoid interference when starting, start ignition before attaching smartphone to Wireless Charging Module.
Inductive charging is only supported for mobile phone models with QC (QuickCharge) standard. The SP Connect power cable for inductive charging (45150-214) conforms to the QC 3.0 standard and thus provides inductive charging for the iPhone 12 series in combination with the wireless charging module.