F 900 R

The life insurance for the engine of the F 850 GS. The protection bar reliably protects the engine and parts of the fairing in the worst case scenario.

The facts:

• Perfect protection for the engine and parts of the fairing
• With diagonal strut for uniform distribution of the forces over 6 attachment points
• No restriction of ground clearance
• Plug & Play fit and assembly. Guaranteed!
• Minimal weight
• Maintenance work is possible without removing the crash bar
• Plastic-coated precision steel pipe
• Detailed yet easy-to-understand instructions
• Incl. installation material
• Made in Germany

Especially for the F 850 GS we have developed this elaborately crafted Fairing Guard. It reliably protects the tank and the fairing and can be combined with our, as well as with the original BMW or other accessory engine guards.

When mounting the tank guard in conjunction with original additional headlamps, the mounting kit Art.No 28363-202 is required.

The facts:

• Optimum protecting for the tank and body
• Beautifully finished, plastic-coated precision steel pipe
• Durable attachment points reliably absorb forces and thus prevent costly damage
• Visually sophisticated integration into the design of the F
• Light on weight but big on effect
• Detailed, easy to understand instructions for simple installation
• Can be mounted with any accessory engine protection bar because it mounts on the vehicle and not on the engine protection bar
• Delivery incl. attachments
• Made in Germany

This engine protection cover set consists of three covers that reliable protection for the exposed points on the engine: these are the clutch cover and the covers for the alternator and water pump!

The two highly complexly designed original engine covers for the alternator and the clutch are vulnerable in the event of a mishap over terrain or a crash. The same applies for the water pump, which is attached to the right of the engine in an elevated position far to the front – if this fails, in certain circumstances it could cause total engine failure.

We have developed a set of fitted, impact-resistant covers to protect the vulnerable housing covers and aggregates. They are uniquely characterised by their integrated, appealing design, which reliably protects the vulnerable areas.

The facts:

• Reliable protection for the engine’s clutch and alternator covers as well as the water pump in the event of crashes, falls or other unpredicted mechanical stress
• Made of durable, impact-resistant special plastic
• Uniform distribution and dissipation of force spikes across the component structure
• Integrated, functional design, incorporates into the design of the vehicle
• With carefully worked in, inward-facing elastomer element for shock absorption, seal against moisture and dust
• Easy and quick installation
• Complete with attachment kit

Technical information

• Material: High-quality, impact-resistant special plastic, precision manufactured with integrated shock-absorbing and sealing elements

Features

• Wunderlich premium product. Small series. Handcrafted.
• Wunderlich design. Integrated and functional.
• 60 days right to return
• Made in Europe
• 5 year warranty

Wunderlich product category

• Protection
• Design

The Wunderlich »EXTREME« engine protection

The functional design and constructive integration of our »EXTREME« engine protection protects the engine and the manifold. It moulds itself so tightly to the aggregate that not only is the frontal area of attack minimised, but the ground and lean angle freedom remain almost entirely unchanged. The form of this protection avoids unpleasant levering or jamming of the vehicle over terrain, no matter whether from branches, scree or rocks. Openings ensure that water picked up during river crossings can flow out freely again. Typically Wunderlich, the team have made sure that you have good, unrestricted access during maintenance works: For example, an opening has been included for unhindered drainage of the engine oil. The aluminium engine protection is corrosion-resistant and the generated forces and vibrations are absorbed by impact-decoupling attachment elements. We manufacture the »EXTREME« engine protection using the challenging and advanced hydroforming manufacturing process. This allows us to realise complex component forms and geometries (especially asymmetrical ones, in which we can achieve lower weight and simultaneously realise high component rigidities and mechanical stability through optimisation of the material thickness. The result is a resistant, weight and form-optimised engine protection unit that moulds so tightly and organically to the aggregate that the design principle of "form follows function" becomes self-evident. It comes in black powder-coated. Our »EXTREME« engine protection is Made in Germany. That's why we're happy to provide a 5-year warranty.

Facts:

Function

• Maximum protection for engine, manifold and front silencer
• Optimum constructive integration and functional design
• Low-profile organic product design or shape that only offers a small area of attack, that avoids unpleasant levering or hooking of the bike over terrain
• Ground and lean angle freedom remain almost entirely unchanged
• Water picked up during river crossings can flow out freely again
• Good, unrestricted access during maintenance works
• Anti-corrosion
• Externally generated forces are intercepted by impact-decoupling attachment elements and vibrations are absorbed
• Manufactured in the hydroforming process, with maximum protection thanks to the optimisation of the material thickness and component form, this enables high component rigidities and mechanical stability at a significantly reduced weight
• Secure attachment
• Additional carrier for complete impact decoupling between protector and engine housing

Technical info

• Material: High-strength aluminium, precision manufactured in the hydroforming process with integrated impact-absorbing attachment elements

Features

• Wunderlich premium product. Small batches. Made by hand.
• Wunderlich design. Integrated and functional.
• 60 days right to return
• Made in Germany
• 5-year warranty

Wunderlich product category

• Protection
• Design

Design for models without original engine protection from the factory.

The radiator is perfectly positioned for the on-rushing air stream, so that anything being carried by this stream finds its way into the cooler. Stones cause damage, while insects and other types of grime accumulate in the delicate fins. Cleaning is an extremely laborious process and requires lots of elbow grease. The cooler protection’s positioned fins provide optimum air throughput and reliably prevent items from hitting the cooler directly.

Our radiator protection is also a visual highlight: The black cooler surfaces disappear and the actual cooler opening is impressively accentuated.

Even though the F 850 GS already has discreet radiator protection as standard, ours offers a great deal more in terms of both impact and appearance.

The facts about the Wunderlich radiator protection:

• Perfect cooler protection and fantastic finish
• Blocks all destructive elements from reaching the cooler
• Intricately manufactured: Follows the cooler’s curve exactly
• Sturdy protection made of powder-coated aluminium
• Quick and easy to fit
• Comes with mounting material and detailed installation instructions
• 5-year warranty
• Made in Germany

Tip: Insects and other grime which has accumulated can be easily removed with a damp cloth. Place the cloth on the grille for approximately 30 minutes so that the dirt can be penetrated with moisture and then removed easier.

The additional safeguard for the F 850 or F 750 GS: Especially when fully loaded or on an unsecured surface, the F 850/750 GS can easily drop on the side stand. The precision milled extension plate quickly screws onto the side stand and frees the GS of this danger.

The facts:

• Secure stand for the bike on all surfaces
• More than 100% larger contact area
• Eight millimetre thick, high-strength aluminium
• Oxidation-proof black anodised
• Rustproofing for original contact area
• Milled groove for original contact equipped with foam rubber to dampen vibrations
• CNC-milled
• Easy to fit

Solid mechanical protection for the quickshifter with a design that makes it look very sporty and that integrates into the design of the GS. The high protective effect is the result of the stiffness of the edged, partially pierced 2 mm aluminium plate. It surrounds the exposed, expensive quickshifter with its decent three-point attachment and reliably protects it.

This reliably reduces the threat of damage to the quickshifter especially during vigorous off-road use. The protection mounts easily using the three existing and easily accessible attachment points on the vehicle.

The facts:

Function

• Solid all-round protection for the expensive and exposed quickshifter
• Durable construction
• High-quality design
• Easy mounting

Technical info

• Aluminium, high-quality processed, anodised
• Material thickness 2 mm
• Complete with attachment kit
• No German Type approval required

Features

• Wunderlich. Integrated design.
• Small batches. Made by hand.
• Made in Germany
• 60 days right to return
• 5 year warranty

The switch, which reliably cuts the ignition whenever the side stand is folded out, certainly prevents a lot of grief. This is because riding off with the side stand folded out can have very unpleasant consequences for both rider and bike. It therefore makes sense to properly protect this exposed switch against damage from stone impacts or falls. After all, if the switch is damaged, the engine will no longer start. We replace the original plastic part with a solid component. The high level of protection is ensured by the stiffness of the angular, partially pierced 2 mm aluminium plate. It surrounds the exposed switch with its sturdy two-point attachment and reliably protects it. This reliably reduces the risk of damage to the switch, especially during vigorous off-road use. The protective cover is simple to install using the two existing and easily accessible attachment points on the vehicle.

Function

• Solid all-over protective cover for the exposed ignition interruption switch on the side stand
• Durable, sturdy construction
• High-quality, attractive design
• Easy to mount

Technical data

• Material: Aluminium, high-quality craftsmanship, black anodised
• Material thickness 2 mm
• Complete with mounting kit

Special features

• Wunderlich. Small batches. Made by hand.
• Integrated design
• No German Type approval
• Made in Germany
• 5-year warranty

Wunderlich glare shield for Cockpit TFT 6.5 inch

With this high-quality glare shield for the BMW Connectivity combi instrument, the display stays easily readable even when the sun is low.

The facts:

• Suitable for BMW Connectivity combi instrument
• High-quality glare screen made of UV-resistant, long-lasting ABS plastic
• Best possible protection against direct sunlight
• Guarantees display readability
• Easy installation via precise, secure clip system
• Developed especially for the Connectivity system
• High fit accuracy
• Secure seat
• Made in Germany
• 5-year warranty

Axis protection pad DoubleShock

Keeps the tar at a safe distance and protects the bike against severe damage.

The facts:

• Effective protection.
• Ideal combination of crash bar and pads: in case of a crash, the bike is now also supported by the crash pads.
• Double protection against impact (integrated damping layer) and sliding damage.
• Racing design for reduced friction resistance / shear forces at smaller accidents or heavy sloping positions and a progressively increasing frictional resistance with prolonged road contact.
• High strength special plastic.
• Safe and easy mounting.
• Inclusive complete fitting kit.
• Made in Germany.

You like to feel the wind in your hair while riding, but without the annoying turbulences? Here we have developed a groundbreaking design concept that gives your BMW a distinctive, sporty and distinctive look in no time at all and, thanks to its aerodynamic shape, ensures laminar flow conditions. Size and proportions of our "FLOWJET" combine perfect design with high basic protection. In addition, the front wheel is always visible.

The facts:

Function

• Easy to install
• Scratch-proof and robust
• Complete set with all attachment hardware
• Includes two weatherproof, model-related design logos (F750 / F850))

Technical data

• Material: High-quality ABS plastic, solid black, unbreakable
• Width: 264 mm
• Height: 261 mm

Features

• Wunderlich Design
• Wunderlich Product. Small batches. Made by hand.
• With German Type approval
• Made in Europe.
• 5 year warranty

Wunderlich hand guard extension ERGO - more protection is not possible, but so much protection should already be there

Function and Product Features

• The integrated hand protectors widening offers maximum protection in everyday use
• Protects hands from cold, moisture, wetness, dirt, stone chips, and insects and ensures that the controls can be operated properly
• Provides more comfort and safety
• Reduces the risk of injury
• Protects your hands and gloves
• Rounded, perfectly crafted edge with water-carrying properties
• Highly durable, scratch- and break-resistant
• High resistance to wind and weather, thermally resistant, pronounced cold flexibility, chemically resistant
• No registration required
• Complete set for right and left
• Perfect grip due to form-fitting installation and decent screwing
• Easy, quick installation
• Incl. mounting components

Technical Specifications

• Material
  • Acrylic, precisely manufactured, thermally resistant, cold-flexible, chemically resistant
• Colour
  • Smoke Grey

Your Wunderlich Advantages

• Wunderlich Premium Product. Small series. Handmade
• Wunderlich. Functional, integrated design
• ERGO
• Made in Europe
• Wunderlich 60/5
  • 60-day return policy - Test without risk!
  • Plus 5 years warranty.

Higher, wider and perfectly integrated - The Wunderlich hand guard extension ERGO

Cold, clammy or wet hands are unpleasant, just like stone chips, road dirt of any kind, or insects striking at high speeds. With our integrated hand protectors widening, we significantly increase the protection area of the original protectors: in height, in width, and we also lead it around the hand to the handlebar end. More protection is not possible, but so much protection should already be there. With these measures, we significantly improve the protective efficiency. We have provided the upper edge with an outwardly projecting collar for water drainage, which directs spray water outwards and lets it drain off laterally.
With cold, clammy, and wet hands and gloves, the controls cannot be operated safely. With soaked gloves, the convection of the driving wind provides even more heat dissipation. Cramps can occur more easily, where relaxed driving is no longer to be thought of. But only those who drive relaxed because they feel comfortable can drive safely. Therefore, our hand protectors extensions, in addition to protection against wind, weather, and mechanical influences, provide more passive safety!

A huge boost in riding comfort in every respect and improved handling. Your BMW feels even lighter and more agile. A barely visible modification that has a massive impact!

The facts:

• 20 mm height increase
• Better handling and a more direct riding experience
• Relaxed, upright sitting position
• Now possible to ride standing up when off-road = More fatigue-free riding and better control
• No changes required to the vehicle
• Individually milled from high-strength aluminium (no casting!)
• Anodised in silver
• Quick and easy assembly without any further modifications
• Complete with screw set
• With German ABE Type approval
• 5 years warranty

Note: For vehicles with the original sat nav holder, you need the handlebar riser 25800-201.

The benchmark lever when it comes to ergonomics, operability and exclusivity!

Our ergonomic clutch levers are characterised by four key features: The adjustable grip length (35 mm adjustment range) which also allows you to adjust the operating forces, the 6-stage adjustable gripping distance and the excellent finish, which can be traced back to the consistently high-quality mechanical manufacture and precision.

This means our grips can be individually adjusted to your own needs, habits or preferences perfectly and precisely.

Function

• 35 mm continuously adjustable adjustment range for the grip length for operation with one, two, three or four fingers
• Use of the entire lever length corresponds roughly to the original lever
• Grip length provides continuous adjustability for clutch operating forces via lever length ? Adjustment to individual needs and preferences
• Adjustability of the gripping distance in 6 stages for quick and optimum adjustment of the grip to the size of your own hand
• Comes with German type approval ? so no registration necessary

Technical information

• Material: High-quality aluminium AL 7075 T6 precisely mechanical crafted ? black anodised, excellent finish

Features

• Wunderlich design. Functional and integrated.
• Small series. Hand crafted.
• Made in Germany
• 60 days right to return
• 5 year warranty

Revolutionary in terms of ergonomics, handling and exclusivity:

We have developed brake and clutch levers that can be optimally adjusted in length and width to best serve your individual needs.Simply unfasten the lever locking screw, and adjust the length according to your personal requirements. With the XR, for example, you’ll want more precise dosing with less hand force, i.e. reduced length.

The VarioLever also allows you to brake with just two or three fingers, without clenching the remaining fingers. This also applies to the clutch hand.Of course, it’s possible to brake with all four fingers again when the lever is fully extended.

A further novelty is the width adjustability, which can now be adjusted while the vehicle is moving - a feature that is of considerable importance when there is an erratic pressure point (e.g. in racing or heavy-duty usage).This is achieved by means of a large pivoting mechanism, which is easy to use, even when wearing thick gloves.

The extraordinarily delicate construction is also extremely resilient:Even with a fully extended lever, loads of more
than 60 kilos(!) can be transmitted without difficulty at the outermost contact point.

High-strength aluminium (AL 7075 T6) which is the material of choice in the aerospace industry. Anodised. ABEcertified, registration is not required.

An open knee angle provides noticeably more comfort when riding. This simultaneously reduces the mechanical load on the knee joints and the constriction of the blood vessels in the hollows of the knees.

With our footrests, the feet rest significantly lower by 25 mm, the knee angle opens up and is enlarged, which leads to a thoroughly relaxed and comfortable sitting position. This makes it possible to reduce the painful and tortuous effects associated with a tight knee angle, among other things, and normally avoid these altogether.

With our sophisticated construction we achieve noticeable, ergonomically effective lowering without considerably extending the base of the rest - and thus the footrest - outwards. A measure that actually adds to your comfort. At the same time, the angle clearance is retained to a high degree. The good accessibility of the gear and break levers and their safe operation makes riding a real pleasure.

Made of high-strength aluminium, the footrests are designed for the heaviest loads.

The facts

Functions:

• 25 mm lower compared to the position of the original footrests
• Ergonomic thanks to a relaxed, open knee angle.
• Reduces the load on the knee joints and blood vessels
• Tireless touring pleasure
• We also offer the option of a vibration-insulating rubber insert (25920-000).
• Complete set with assembly kit
• With German Type approval

Features

• Wunderlich premium product. Small batches. Made by hand.
• Wunderlich design. Integrated and functional.
• 60 days right to return
• Made in Europe
• 5 year warranty

We've designed our Vario EVO 1 footrest system with special consideration for all those who find the knee angle of the original GS too tight and uncomfortable over time. With the sophisticated Vario system, the footrests can be completely individually adjusted vertically and horizontally and lowered by 23-50 mm regardless of the adapter selected. This leads to a relaxed and comfortable knee angle.

It should also be considered that contact with the brake pedal is always intuitive. The brake pedal and its spatial alignment to the footrest simply has to line up. So we definitely recommend our matching foot brake lever lowering kit for anyone using the variable system to lower the footrests in order to enlarge the knee angle. This is because lowering the footrest means the brake pedal is inevitably too high. Our foot brake lever lowing kit takes care of the necessary adjustment by lowering the foot brake lever too. To do this we use a stainless steel adapter that drops the foot pedal stop by approx. 12 mm. This restores the balance in the ergonomics between the foot rest and the brake lever. And this tiny measure increases passive safety.

The facts

• Easy to mount stop for lowering the foot brake lever
• Lowered by approx. 12 mm
• Ideal adjustment e.g. when using our Vario EVO1 footrest
• Includes assembly kit

Technical information

• Material: Stainless steel, precision crafted, stainless steel colour

Features

• Wunderlich - Small batches. Made by hand
• Wunderlich functional and integrated design
• 60 days right to return
• Made in Germany
• 5 year warranty
• No German type approval required

A clever all-round alternative to the oversensitive, impractical and optically plain original. The gear shift lever can now be optimally adapted to all shoe sizes and riding habits, and changing gears on the GS becomes child’s play thanks to the roller-mounted shift lever.

And the gear shift lever is protected from bending in two ways. Even a harmless spill or a branch caught between lever and housing can bend the shifter shaft, inevitably leading to an expensive repair job.

Note: The shifting travel shortening cannot be used in conjunction with the automatic gearshift.
The pre-assembled position (standard shift travel) must be used.

The facts:

• Foldable.
• Simple, precise gear changing by means of a roller-mounted rubber-coated gear shift lever tip.
• One-time setting of the shift travel: either original shift travel or shorter/longer shift travel for sport/offorad use.
• Made of strong CNC-machined 7075 T6 aluminium.
• Stepless length adjustment.
• Wear-free stainless steel folding mechanism. Extra-strongly bolted.
• Reinforced serration.
• Extremely lightweight construction.
• Made in Germany.

The precision cut serration of the clamp ensure a tight fit on the shaft, even in cases where the shaft tip is slightly worn.

In its original form the footrest area of the brake lever is unfortunately rather small, which all too often presents a safety risk. This enlargement for the foot brake lever functions as an extension of the original foot brake lever. It simply screws onto the lever. Accidental slippage or failure of the lever and the associated "kicking empty air" thus becomes almost impossible. The carefully milled fluting provides protection against slippage in the wet. The enlarger improves ergonomics and comfort and thus increases passive safety.

The facts:

Function

• Increases passive safety when using the brake - and not just in the wet
• Improved ergonomics and comfort via significantly increases surface area
• Greater slippage protection thanks to the milled fluting
• Easy mounting with supplied mounting materials

Technical information

• Aluminium, carefully milled, anodised in silver colours

Features

• Wunderlich premium product. Small batches. Made by hand.
• Wunderlich design. Integrated and functional.
• 60 days right to return
• Made in Europe
• 5 year warranty

We also manufacture our reduced height seats with a characteristic, ergonomic 3D contour that lets riders and passengers become one with their BMW. Integrated, riding is a relaxing affair and thus also active. And there's no doubt that relaxed sitting adds a serious plus to passive safety. The integrated wind channel on the seat provides pleasant ventilation while you ride. Grippy cover material also increases the comfort factor. With our ThermoPro rider and passenger seats, the temperature of the seat surface is up to 25°C lower in full sun in high summer compared to conventional cover material.

The same applies to all AKTIVKOMFORT seats:

The facts:

Function

• A relaxed and active riding experience adds a definite plus to passive safety
• Ergonomic 3D contour to support the natural posture of the back and comfortable leg position while riding and standing
• Improved passenger contour for better hold at the front
• The sitting pressure is equally distributed over a larger area, resulting in noticeably optimised weight distribution and lower specific pressure load
• Ergonomic shape of the special foam to relieve the coccyx
• Uncompromising long-distance comfort
• More comfort with ThermoPro: With our ThermoPro rider and passenger seats, the temperature of the seat surface is up to 25°C lower in full sun in high summer compared to conventional cover material.
• Sweat-reducing, grippy cover material, combined with pin-tucks in Alcantara
• Embroidered Wunderlich logo
• Made in Germany

Technical info

• Cover material with ThermoPro
• Sweat-reducing, grippy cover material, combined with pin-tucks in Alcantara, dropped „Cut“ seams
• Taped and welded seams for 100% tightness on modern PFAFF hot air welding machines
• Material of seat shell: High-strength shell of our own construction
• Special, ergonomic seat bench core
• Design: Trophy – Gravity blue, black

Features

• Wunderlich premium product. Small batches. Made by hand.
• Wunderlich design by Nicolas Petit. Integrated and functional.
• 60 days right to return
• Made in Germany
• 5-year warranty