K 1600 GT

The developing the engine protection bars for the K1600 B, we were able to strike an ideal balance. On the one hand, we created a beautifully shaped bar that integrates perfectly into the design of the large, yet dynamically styled K1600, without making the bike appear even more massive. We followed and expanded on the lines of the fairing as well as the angle of the motor. On the other hand, we created a protection bar made of ideally shaped and complexly formed round tubing that will protect the bike, not only in a tip over situation, but also in worse mishaps.

Each engine bar is attached to the bike at three points, all of which are capable of handling large tensile and compression loads. In an impact situation, the forces are spread over the multiple attachment points. The bar need not be removed for routine maintenance, nor does it impede serviceability in any way. Cornering and ground clearances are not compromised. The bars are also fully compatible with the original BMW driving lights. Available chrome plated or powder coated black.

The crash bar can be combined with the original main beam lights using the optionally available adapters (35510-210).

The facts:

• Nicely shaped, integrated design
• Three attachment points, each bar
• Complexly shaped 25mm OD round tubing
• Routine maintenance not affected
• Cornering clearance not compromised
• Supplied complete with all needed hardware and instructions
• No modifications to the bike or fairing required
• Made in Germany
  

The saddlebag protection bars are the ideal complement to our engine protection bars, but they can also be installed without them. They optically integrate to the bike and offer outstanding protection for the rear of the heavy K1600. If your bike were to tip over, the protruding saddlebags would surely suffer some damage. These bars effectively protect the saddlebags against such damage. Also when maneuvering in tight spaces, the bars can protect your bike from scratches and other damage.

Each saddlebag protection bar attaches to the bike at three points so that in case of a fall, the impact is spread over all points and the energy is absorbed. Ground clearance and cornering clearance is not compromised. Available chrome plated or powder coated silver/black.

The facts:

• Protects the saddlebags from side impacts and damage in a tip over
• Fits K1600 GT and GTL
• Three attachment points, each bar
• Complexly shaped round tubing
• Also provides a nice hand hold for the passenger
• Complete set (right + left), including installation kit
• Additionally serves as a lifting and tie down point
• Available in chrome or black
• Supplied complete with all needed hardware and instructions
• No modifications to the bike required
• 5 years guarantee
• Made in Germany

The oil cooler of the K 1600 GT and GTL is not only soiled quickly by insects and dirt, it can also be easily damaged by stones. Our high quality guard protects the oil cooler effectively and covers the optically unsightly gap in the fairing.

It is mounted with two screws which guarantee a stable positioning.

The facts:

• easy mounting
• reliable protection against stone impact and dirt
• 5 years warranty
• Made in Germany

We have been offering side stand enlargers for BMW motorcycles for many years and we offer model specific enlargers for nearly every model since 1994. Our design is simple, easy to install and time tested. The side stand enlarger is made of machined anodized aluminum and it features a serrated edge to provide a better grip when deploying the stand.

Considering the weight of the K 1600 GT and GTL (2016-) , the original side stand plate at roughly 2”x 2” is on the small side to offer secure support, especially when parking on loose ground or hot asphalt. Our side stand enlarger increases the surface area by approximately 50% and provides the needed support and peace of mind. The part is precisely shaped so that there is no interference with any other part of the bike and it is also visually unobtrusive.

The three clamping screws hold the enlarger firmly in place with no drilling or other modifications needed. Be sure to place a few drops of thread locking fluid on the screws to avoid them backing out and the part falling off. We offer thread locking fluid under the Related Products tab.

The facts:

• Safe support for the machine on all surfaces
• Surface area increased by more than 100%
• 8 mm thick, high-strength aluminium
• Rustproof anodised black
• Rust protection for the original stand plate
• Cut-out for original foot lined with vibration-absorbing foam rubber
• CNC machined
• Easy to fit

With this high-quality glare shield for the BMW Connectivity combi instrument, the display stays easily readable even when the sun is low.

Facts

Function

• Fits the TFT 10.25 inch - Connectivity Display combi instrument
• Best possible protection against direct sunlight
• Guarantees display readability
• Easy installation via precise, secure clip system
• Developed especially for the Connectivity system
• High fit accuracy
• Secure fit

Technical information

• Material
  • UV-resistant, durable black ABS plastic
• Dimensions
  • Width 322 mm
  • Length approx. 132 mm
  • Depth 77 mm

Your Wunderlich benefits

• Wunderlich product. Small series. Hand crafted.
• Wunderlich design. Functional and integrated.
• Made in Europe
• 60 days right to return - test it out with zero risk
• 5 year warranty

BMW aims to underscore the lightness of the K with the breezy rear framework. The down side: the gap between the side cover and rear footrest bracket means the legs and feet are defenceless against moisture and dirt. The water sloshes up unhindered over the boots as far as the thigh. Massive wetting and soiling of the driver and passenger result. In addition, dirt and water are distributed over the side cover, case and footrest brackets.

The facts:

• Does away with half-hearted solutions
• Reliably protects the rear against dirt and splashed up water
• Easy mounting
• Made of 3 mm thick, scratch- and shatter resistant acrylic plastic
• Available in a choice of black or smoke
• Practically indestructible and extremely scratch-proof
• Complete with fitting kit
• No technical registration required

The original mudguard is simply too short!
The result is dirty headers and engine cases, clogged up oil coolers, stone damage to the radiator and unnecessary water splashing are irritating.

This extension of the original mudguard, thermoformed from ABS material, puts an end to the problem.

Supplied complete with fastening screws and self-adhesive foam strips for a vibration-free and secure fit.

Black ABS plastic.

For the original mudguards.

Quick and easy mounting.

Just one stone thrown up from the road or a short offroad excursion can spell the end for you expensive Auxiliary Lights.
The very robust bracket and sturdy grille provide protection even from violent impacts.

The facts:

• High protection factor for the Auxiliary Lights
• Set for 2 auxiliary lights.
• Easy to install
• Robust, black coated metal construction
• Made in Germany
  

The tri-piece tankpad set is designed to match the design of the BMW. The pads effectively protect against scratches, damage and abrasion at all contact points, and improve knee closure and provide a more direct contact to the bike through increased adhesion. This significantly increases the driving experience and driving pleasure. The material consists of high-quality and non-slip black plastic, is shock-absorbing and slightly grained. The pads are self-adhesive.

The facts:

Function

• Suitably matched to the BMW
• Effective protection against scratches
• Provides excellent grip, better knee closure, more driving feel and driving fun
• Excellent shock absorption performance
• Remains dimensionally stable even at extreme temperatures
• Resistant to almost all chemicals
• UV-resistant

Specifications

• Material: Semi-rigid integral polyurethane foam
• Thickness: 4 mm

Special

• Made in Germany

We developed in all direction the MARATHON windshield into a GTL, so we realised an optimal and turbulence-free touring enjoyment – without the extreme sucking in-effect of GTL. That’s why the windshield is suitable for both GT and GTL.

The facts:

• Larger and higher than GT windshield.
• Bigger gap between fairing and windshield, than means less sucking in- effect.
• Turbulence-free through different break off point.
• Higher windshield, between GT and GTL windshield.
• Clear, optical pure.
• High form stability.
• Break-proof.
• Scratch resistant.
• Low own vibration.
• Optimal view in every situation.
• Very high-quality, optically clean, extremely tough, scratch-resistant, UV and fuel-resistant PMMA polymer for an optimal view.
• Clear, polished and rounded edges, no edge protection/border bulge needed.
• ABE approved.

Service!
In our shop there’s always a windshield for testing. During a ride with your motorbike you can test the quality on your own.

A perfectly designed width extension for the fairing that sustainably improves touring comfort and effectively protects the legs and feet against wind, moisture and cold. Cold air flows and upward rising turbulences that occur beneath the fairing are now effectively cancelled out.

Our test rides shows that this width is optimal for the K 1600 GT. The contour follows the fairing design perfectly and this extension is our crystal clear upgrade for the new K design. The clear design supports the K's claim to being probably one of the best tourers that now combines an excellent, agile suspension with the protection of a super tourer.

The extensions can be folded away on hot days, allowing the cooling riding wind through unhindered. Thus even long tours become a real pleasure.

The facts:

• Perfect, additional wind and moisture protection
• Adjustable positioning, practical for hot days
• 4 mm thick, Scratch-proof acrylic plastic
• Incl. ABE and all installation materials
• Easy fitting

For a long time, the use of hand guards was reserved exclusively for off-road machines. Entirely incomprehensible from today's perspective, as a protector directly in front of the hand offers many otherwise unobtainable advantages.

The facts:

• Maximum protection from cold, rain, or dirt.
• Made of highly durable, scratch- and shatter-resistant acrylic plastic.
• Lightweight, discreet mounting kit.
• Easy, quick installation.

Does not fit on the K 1600 GTL Exclusive!

Handlebar rise of 15 mm for an even more relaxed sitting position on BMW's Super Tourer. The ergonomic symbiosis of perfect touring seat position and relaxed long distance travel suitability.

A barely visible modification, with a conspicuous effect. Thus even longer tours become a joy!

The facts:

• 15 mm height increase
• Better handling
• More direct riding feel
• Relaxed, upright, seating position
• More freedom of movement
• Individually milled from high-strength aluminium (no casting!)
• Anodised silver
• Complete with screw set
• ABE tested

The benchmark lever when it comes to ergonomics, operability and exclusivity!

Our ergonomic clutch levers are characterised by four key features: The adjustable grip length (35 mm adjustment range) which also allows you to adjust the operating forces, the 6-stage adjustable gripping distance and the excellent finish, which can be traced back to the consistently high-quality mechanical manufacture and precision.

This means our grips can be individually adjusted to your own needs, habits or preferences perfectly and precisely.

Function

• 35 mm continuously adjustable adjustment range for the grip length for operation with one, two, three or four fingers
• Use of the entire lever length corresponds roughly to the original lever
• Grip length provides continuous adjustability for clutch operating forces via lever length ? Adjustment to individual needs and preferences
• Adjustability of the gripping distance in 6 stages for quick and optimum adjustment of the grip to the size of your own hand
• With German type approval

Technical information

• Material: High-quality aluminium AL 7075 T6 precisely mechanical crafted ? black anodised, excellent finish

Features

• Wunderlich design. Functional and integrated.
• Small series. Hand crafted.
• Made in Germany
• 60 days right to return
• 5 year warranty

Wunderlich »VARIOLEVER« adjustable brake lever

The benchmark lever when it comes to ergonomics, operability and exclusivity!

Our ergonomic brake levers are characterised by four key features: The adjustable grip length (35 mm adjustment range) which also allows you to adjust the operating forces, the 6-stage adjustable gripping distance and the excellent finish, which can be traced back to the consistently high-quality mechanical manufacture and precision.

This means our grips can be individually adjusted to your own needs, habits or preferences perfectly and precisely.

Function

• 35 mm continuously adjustable adjustment range for the grip length for operation with one, two, three or four fingers
• Use of the entire lever length corresponds roughly to the original lever
• Grip length provides continuous adjustability for brake operating forces via lever length. Adjustment to individual needs and preferences
• Adjustability of the gripping distance in 6 stages for quick and optimum adjustment of the grip to the size of your own hand
• High-quality, precision mechanical manufacture with excellent and attractive technical finish
• With German type approval

Technical information

• Material: High-quality aluminium AL 7075 T6 precisely mechanical crafted ? black anodised, excellent finish

Features

• Wunderlich design. Functional and integrated.
• Small series. Hand crafted.
• Made in Germany
• 60 days right to return
• 5 year warranty

This footrest lowering has been developed with ergonomics in mind. It provides a relaxed and comfortable seating position and does not leave behind any “postural damage”, even after longer riding stretches.

In order to achieve the optimal foot position, the lowering bracket had to be carefully machined from solid aluminium. Long-distance comfort increases noticeably as the knee is set at an angle that encourages blood flow, preventing painful cramps. What arises is the feeling of being at one with the bike, and cornering becomes much easier.

The facts:

• Relaxed seating position.
• Suitable for K 1600 GT.
• German type approval.
• Reduced knee angle.
• Machined from solid aluminium.
• Doesn't require any modifications to the original support.

The gear lever is too short and too thin for many. This enlargement simply slides over the original rubber and is firmly held in place with a clip.

The length, girth and the improved grip make changing gears a pleasure. The brake or gear* lever is also given a sporty look.

The facts:

Function

• Easy, quick installation
• With boot-protecting rubber
• Approx. 6 mmm larger circumference and approx. 10 mm longer.
• Turned and milled from aluminium
• Anodised silver
• 5 year warranty
• Made in Germany.

*Please note the vehicle allocation - offer contains one enlargement

In its original form the footrest area is unfortunately rather small, which all too often presents a safety risk. If your boot is resting too far towards the edge of the footrest, you have to bend it awkwardly to reach the brake. With this lever enlarger installed, a wet boot slipping off the lever tip or treading on thin air belong in the past.

The extension means that it is almost impossible for the foot to slip off or to miss the lever altogether. The GT is also enriched by the addition of another highlight.

The enlargement is machined/turned to fit accurately on the original brake lever and is either bolted to the underside using a counter piece or fitted over the lever and secured using a fixing screw.

You’ll learn to appreciate this innovation once you’ve tried it out.

The facts:

• High-quality workmanship using solid aluminium.
• Durable anodised coating.
• Quick and easy fitting

We manufacture our seats with a characteristic, ergonomic 3D contour that lets the rider become one with their BMW. The shape and angle of the carefully crafted, progressively structured, seat core, which comes with an integrated seat heating element, support the ergonomically beneficial, natural posture of the back. Integrated, riding is a relaxing affair and thus also active. And there's no doubt that relaxed sitting adds a serious plus to passive safety. With the ThermoPro coating, the temperature of this seat in direct sun at the peak of summer is up to 25°C lower compared to standard, untreated cover materials. We also have a passenger seat in the range to go with this.

Function

• Unbeaten, optimum seat comfort thanks to innovative gel insert
• A relaxed and active riding experience adds a definite plus to passive safety
• Ergonomic 3D contour to support the natural posture of the back and comfortable leg position while riding and standing
• The sitting pressure is equally distributed over a larger area, resulting in noticeably optimised weight distribution and lower specific pressure load
• Distinct concave profile to relax the coccyx
• Seat heating insert for optimum heat distribution
• More comfort with ThermoPro: With the ThermoPro coating, the temperature of this seat in direct sun at the peak of summer is up to 25°C lower compared to standard, untreated cover materials
• Refined, dropped "Cut" seams
• Embroidered Wunderlich logo
• Made in Germany.

Techn. Information

• Cover material with ThermoPro coating
• Sweat-reducing, grippy cover material, combined with pin-tucks in Alcantara, dropped "Cut" seams
• Taped and welded seams for 100% tightness on modern PFAFF hot air welding machines
• Standard seat height
• -20 mm seat height for the R 1250 GS Adventure and R 1200 GS LC Adventure

Note: Due to the specific heat capacity of the integrated gel inlay, heating up and decreasing of the seat temperature are more harmonious, physically they are slightly longer compared to the original seat.

Features

• Wunderlich premium product. Small batches. Made by hand.
• Wunderlich design. Integrated and functional.
• 60 days right to return
• Made in Germany
• 5-year warranty

Wunderlich product category

• Ergonomics
• Design

We manufacture our seats with a characteristic, ergonomic 3D contour. The shape and angle of the carefully crafted, progressively structured, seat core, which comes with an integrated seat heating element, support the ergonomically beneficial, natural posture of the back. One special feature of our passenger seat is the integrated support contour on the front of the seat that provides an additional secure hold while braking.

Integrated, riding is a relaxing affair and thus also active. And there's no doubt that relaxed sitting adds a serious plus to passive safety. With our ThermoPro rider and passenger seats, the temperature of the seat surface is up to 25°C lower in full sun in high summer compared to conventional cover material. We also have a passenger seat in the range to go with this.

The same applies to all AKTIVKOMFORT seats: The "buckling" of the cushioning is reliably prevented via the sophisticated construction and the sitting pressure is equally distributed over a large area, resulting in noticeably lower specific pressure load to your behind. Comfy! AThe ergonomic shape of the special foam also relieves the pressure-sensitive coccyx.

They offer perfect hold and active, reliable control during accelerated riding, also and especially when braking: who hasn't experienced it, when your passenger suddenly slides forward on braking and you immediately have to brace while simultaneously having to steer in what could be a hairy situation? With Wunderlich's very own support contour, these scary moments while braking are now a thing of the past. The innovative, ergonomic 3D contour also ensures that pressure points on the inner thighs while standing at the lights are now a distant memory.

The facts:

Function

• A relaxed and active riding experience adds a definite plus to passive safety
• Ergonomic 3D contour to support the natural posture of the back and comfortable leg position while riding and standing
• The sitting pressure is equally distributed over a larger area, resulting in noticeably optimised weight distribution and lower specific pressure load
• Ergonomic shape of the special foam to relieve the coccyx
• Seat heating insert for optimum heat distribution
• More comfort with ThermoPro: With our ThermoPro rider and passenger seats, the temperature of the seat surface is up to 25°C lower in full sun in high summer compared to conventional cover material.
• Refined, dropped "Cut" seams
• Embroidered Wunderlich logo
• Made in Germany.

Techn. Information

• Cover material with ThermoPro
• Sweat-reducing, grippy cover material, combined with pin-tucks in Alcantara, dropped "Cut" seams
• Taped and welded seams for 100% tightness on modern PFAFF hot air welding machines
• Standard seat height

Note: Due to the specific heat capacity of the integrated gel inlay, heating up and decreasing of the seat temperature are more harmonious, physically they are slightly longer compared to the original seat.

Features

• Wunderlich premium product. Small batches. Made by hand.
• Wunderlich design. Integrated and functional.
• 60 days right to return
• Made in Germany
• 5-year warranty

Wunderlich product category

• Ergonomics
• Design